Extreme Dimensions’ new Duraflex
aerodynamics is a revolutionary product which combines the advantages of
fiberglass, plastic, and flex resins to obtain its unique features.
Duraflex is a combination of
fiberglass, plastic, and flex resins resulting in the best of both worlds.
Duraflex (PFRP) products have a higher durability rate, reducing damage rates up
to 75%, while still retaining its flexibility and staying true to form. Every
Duraflex product is inspected through a rigorous quality control process giving
consumers the highest quality product available with superior craftsmanship.
This process ensures that Duraflex products are free from normal fiberglass
deficiencies including waviness, spider cracks, chips, and gel coat damage.
Duraflex products come finished with a shiny black gel coat, high quality mesh,
hardware kit, and an installation guide. With such attention to detail,
Duraflex products are surprisingly affordable, roughly 50% of the cost of a
comparable high quality JDM product. Duraflex products include many advantages
of both fiberglass and poly- urethane aerodynamics, while leaving out most of
the disadvantages. Duraflex aerodynamics is recommended for the consumer with a
medium budget and wants to get the best value for the amount of money spent. The
main difference between Duraflex and fiberglass is the quality. The fitment
between Duraflex and fiberglass is the same.
Features:
* Glossy black gel coat finish
* Shiny, high quality metal mesh
* Hardware kit
* Installation guide
* Reduced damage rate up to 75%
* Extremely affordable, roughly half the cost of Urethane
Duraflex products obtain a much higher durability rate than the average
fiberglass product, reducing damage rates up to 75%. All Duraflex products
feature a glossy black gel coat, a quality metal mesh, general hardware kit, and
a general guide to help you install the product. Conventional fiberglass
products have cracks throughout the gel coat, are thin enough to see through,
have seams down the middle of the bumper, and are brittle or weak. In essence,
our new Duraflex products will give you greater durability at the cost of
fiberglass. Please refer to our website for downloadable videos of this new
revolutionary product.
All Duraflex parts go through a 10 point inspection. Each and every part is
checked for waviness, chips in the primer, poor cutting along the edges, cracks,
etc. This ensures that all our customers receive the highest quality product
available. Due to the rigorous inspection process, our customers save on
preparation labor resulting in a reduced total cost for installation.
 |
 |
 |
| 06-11 Mercedes Benz CLS C219
Carbon Fiber CR-S Front Splitter
|
07-09 Mercedes Benz S Class W221 Carbon L-Sport Spliter
|
10-12 Chevy Camaro Carbon Fiber
SS-2 Rear Wing Spoiler
|
